As imagens são apenas para referência. Consulte as especificações do produto
ST STM32L010K8T6
ARM Microcontrollers - MCU Ultra-low-power value line Arm Cortex-M0+ MCU 64-Kbytes of Flash , 32 MHz CPU
Marcas: ST
Parte do fabricante #: STM32L010K8T6
Ficha de dados: STM32L010K8T6 Datasheet (PDF)
Pacote/Caso: LQFP32
Tipo de Produto: Processadores e controladores incorporados
Status RoHS:
Condição de estoque: 3967 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Adicionar à lista técnicaSTM32L010K8T6 Descrição geral
The ultra-low-power STM32L010K8/R8 microcontrollers incorporate the high-performance Arm®Cortex®-M0+ 32-bit RISC core operating at 32 MHz, high-speed embedded memories (64 Kbytes of Flash program memory, 256 bytes of data EEPROM and 8 Kbytes of RAM) plus an extensive range of enhanced I/Os and peripherals.ST-LINK/V2 in-circuit debugger/programmer for ST.Evaluation board with STM32L073VZ MCU.STM32 Nucleo-64 development board with STM32L010.Discovery kit with STM32L053C8 MCU.
Características
- Ultra-low-power platform
- 1.8 V to 3.6 V power supply
- –40 to 85 °C temperature range
- 0.27 µA Standby mode (2 wakeup pins)
- 0.4 µA Stop mode (16 wakeup lines)
- 0.8 µA Stop mode + RTC + 8-Kbyte RAM retention
- Down to 88 µA/MHz in Run mode
- 5 µs wakeup time (from Flash memory)
- 41 µA 12-bit ADC conversion at 10 ksps
- Core: Arm® 32-bit Cortex®-M0+
- From 32 kHz to 32 MHz
- 0.95 DMIPS/MHz
- Reset and supply management
- Ultra-low-power BOR (brownout reset) with 5 selectable thresholds
- Ultra-low-power POR/PDR
- Clock sources
- 0 to 32 MHz external clock
- 32 kHz oscillator for RTC with calibration
- High-speed internal 16 MHz factory-trimmed RC (±1%)
- Internal low-power 37 kHz RC
- Internal multispeed low-power 65 kHz to 4.2 MHz RC
- PLL for CPU clock
- Pre-programmed bootloader
- USART, SPI supported
- Development support
- Serial wire debug supported
- Up to 51 fast I/Os (45 I/Os 5-Volt tolerant)
- Memories
- 64-Kbyte Flash memory
- 8-Kbyte RAM
- 256 bytes of data EEPROM
- 20-byte backup register
- Sector protection against R/W operation
- Analog peripherals
- 12-bit ADC 1.14 Msps up to 16 channels (down to 1.8 V)
- 7-channel DMA controller, supporting ADC, SPI, I2C, USART and timers
- 4x peripherals communication interface
- 1x USART (ISO7816), 1x LPUART (low power)
- 1x SPI 16 Mbit/s
- 1x I2C (SMBus/PMBus)
- 7x timers: 1x 16-bit with up to 4 channels, 1x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC and 2x watchdogs (independent/window)
- CRC calculation unit, 96-bit unique ID
- All packages are ECOPACK2 compliant.
Especificações
| Parâmetro | Valor | Parâmetro | Valor |
|---|---|---|---|
| Supply Voltage Min Volt | 1.8 | Supply Voltage Max Volt | 3.6 |
| Operating Temp Min Celsius | -40.0 | Operating Temp Max Celsius | 85.0 |
| Core | Arm Cortex-M0+ | ECCN US | 3A991.a.2 |
| ECCN EU | NEC | Packing Type | Tray |
| RoHs compliant | Ecopack2 | Grade | Industrial |
| Package Name | LQFP 32 7x7x1.4 mm |
Envio
| Tipo de envio | Taxa de envio | Tempo de espera | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
| Termos de pagamento | Taxa de mão | |
|---|---|---|
 |
Transferência bancária | cobrar taxa bancária de US$ 30,00. |
 |
PayPal | cobrar taxa de serviço de 4,0%. |
 |
Cartão de crédito | cobrar taxa de serviço de 3,5%. |
 |
Western Union | charge US.00 banking fee. |
 |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
![produtos]( "produtos")
Etapa1 :produtos
-
![Embalagem a vácuo]( "Embalagem a vácuo")
Etapa2 :Embalagem a vácuo
-
![Saco antiestático]( "Saco antiestático")
Etapa3 :Saco antiestático
-
![Embalagem individual]( "Embalagem individual")
Etapa4 :Embalagem individual
-
![Caixas de embalagem]( "Caixas de embalagem")
Etapa5 :Caixas de embalagem
-
![etiqueta de envio com código de barras]( "etiqueta de envio com código de barras")
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Part points
-
The STM32L010K8T6 chip is a low-power microcontroller unit (MCU) from STMicroelectronics. It is based on the ARM Cortex-M0+ core and is specifically designed for energy-efficient applications. With its low power consumption and a wide range of features, such as digital peripherals, multiple communication interfaces, and integrated flash memory, the STM32L010K8T6 chip is suitable for various battery-powered devices and Internet of Things (IoT) applications.
-
Equivalent
Some equivalent products of the STM32L010K8T6 chip include the STM32L072KZT6, STM32L051K8T6, and STM32L011K4T6. These chips offer similar features and capabilities to the STM32L010K8T6 while potentially having minor differences in specifications or performance. -
Features
The STM32L010K8T6 is a microcontroller with the following features: 8KB of Flash memory, 2KB of RAM, 16MHz operating frequency, low power consumption, multiple communication interfaces (SPI, I2C, USART), 6-channel 12-bit ADC, 2-channel DAC, up to 16 GPIO pins, and various timers and PWM outputs. -
Pinout
The STM32L010K8T6 is a microcontroller with 32 pins. It is part of the STM32L0 series and features a Cortex-M0+ core. It provides various functions such as digital I/O, timers, SPI, I2C, UART, ADC, and more. -
Manufacturer
The manufacturer of the STM32L010K8T6 is STMicroelectronics. It is a multinational semiconductor company involved in designing, manufacturing, and marketing a broad range of products, including microcontrollers, sensors, power management circuits, and more. STMicroelectronics is a prominent player in the electronics industry and serves various sectors such as automotive, industrial, healthcare, and consumer electronics. -
Application Field
The STM32L010K8T6 microcontroller is suitable for low-power applications and is widely used in various industries including consumer electronics, wearable devices, home automation, and industrial control systems. It can also be used in battery-powered devices, IoT applications, and sensor nodes where energy efficiency is critical. -
Package
The STM32L010K8T6 chip is available in a LQFP package type (low-profile quad flat package). It is a 32-bit microcontroller and has a small form factor, measuring 7 mm x 7 mm.
Ficha de dados PDF
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
![produtos]( "produtos")
Temos produtos ricos que podem atender às suas diversas necessidades.
-
![quantity]( "quantity")
A quantidade mínima de pedido começa em 1 unidade.
-
![shipping]( "shipping")
A menor taxa de envio internacional começa em US$ 0,00
-
![garantia]( "garantia")
365 dias de garantia de qualidade para todos os produtos
We’ve seen significant improvements in our system after using Ovaga’s components.