ST STM32F103RCT7
ARM® Cortex®-M3 STM32F1 Microcontroller IC 32-Bit Single-Core 72MHz 256KB (256K x 8) FLASH 64-LQFP (10x10)
Marcas: STMicroelectronics, Inc
Parte do fabricante #: STM32F103RCT7
Ficha de dados: STM32F103RCT7 Datasheet (PDF)
Pacote/Caso: LQFP-64
Tipo de Produto: ARM Microcontrollers - MCU
Status RoHS:
Condição de estoque: 2846 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Adicionar à lista técnicaSTM32F103RCT7 Descrição geral
The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.Evaluation board with STM32F103Zx MCU.STM32 Nucleo-64 development board with STM32F103.ST-LINK/V2 in-circuit debugger/programmer for ST.
Características
- Core: ARM® 32-bit Cortex®-M3 CPU
- 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- up to 64 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
- Conversion range: 0 to 3.6 V
- Triple-sample and hold capability
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller
- Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M3 Embedded Trace Macrocell™
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 11 timers
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
RoHS: | Details | Series: | STM32F103RC |
Mounting Style: | SMD/SMT | Package / Case: | LQFP-64 |
Core: | ARM Cortex M3 | Program Memory Size: | 256 kB |
Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
Maximum Clock Frequency: | 72 MHz | Number of I/Os: | 51 I/O |
Data RAM Size: | 48 kB | Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 105 C | Packaging: | Tray |
Brand: | STMicroelectronics | Data RAM Type: | SRAM |
Height: | 1.4 mm | Interface Type: | CAN, I2C, SPI, USART |
Length: | 10 mm | Moisture Sensitive: | Yes |
Number of ADC Channels: | 16 Channel | Number of Timers/Counters: | 11 Timer |
Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
Program Memory Type: | Flash | Factory Pack Quantity: | 960 |
Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
Width: | 10 mm |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
Transferência bancária | cobrar taxa bancária de US$ 30,00. | |
PayPal | cobrar taxa de serviço de 4,0%. | |
Cartão de crédito | cobrar taxa de serviço de 3,5%. | |
Western Union | charge US.00 banking fee. | |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Part points
-
The STM32F103RCT7 chip is a microcontroller from STMicroelectronics that belongs to the STM32F1 series. It features an ARM Cortex-M3 core running at a maximum speed of 72 MHz, along with a variety of peripherals and memory options. It is widely used in industrial applications, consumer electronics, and other embedded systems that require reliable and efficient processing capabilities.
-
Equivalent
Some equivalents of the STM32F103RCT7 chip include the STM32F103C8T6, STM32F103CBT6, and STM32F103RBT6. These chips are similar in features and functionalities, but may differ in terms of package type, memory capacity, and pin count. -
Features
The STM32F103RCT7 microcontroller is based on the ARM Cortex-M3 core, runs at 72MHz, has 256KB flash memory, 48KB RAM, and is equipped with various communication interfaces such as SPI, I2C, USART, and USB. It also features a 12-bit ADC, timers, and GPIO pins, making it suitable for a wide range of applications. -
Pinout
The STM32F103RCT7 is a microcontroller with a 64-pin count. It is part of the STM32F1 series and features ARM Cortex-M3 core. The pins provide various functions such as GPIO, UART, SPI, I2C, ADC, DAC, timers, interrupts, and more. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F103RCT7. It is a multinational semiconductor and electronics company based in Geneva, Switzerland. STMicroelectronics is known for its wide range of products, including microcontrollers, sensors, power management, and communication devices. -
Application Field
The STM32F103RCT7 microcontroller can be used in various application areas, including industrial automation, motor control, power management, home appliances, and consumer electronics. It offers excellent performance, high-speed connectivity, and rich peripheral support, making it a versatile choice for a wide range of embedded systems. -
Package
The STM32F103RCT7 chip is available in a LQFP64 package type, has a form factor of Quad Flat Package, and has a size of 10mm x 10mm.
Ficha de dados PDF
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos
Ovaga always has the components I need in stock and they always work perfectly for my projects.