As imagens são apenas para referência. Consulte as especificações do produto
ST STM32F102C8T6
ARM Microcontrollers - MCU 32BIT Cortex M3 L/D USB MCU
Marcas: STMicroelectronics, Inc
Parte do fabricante #: STM32F102C8T6
Ficha de dados: STM32F102C8T6 Datasheet (PDF)
Pacote/Caso: LQFP-48
Status RoHS:
Condição de estoque: 3506 peças, novo original
Tipo de Produto: CIs lógicos programáveis
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*Todos os preços estão em USD
| Quantidade | Preço unitário | Preço Externo |
|---|---|---|
| 1 | $5,771 | $5,771 |
| 10 | $5,047 | $50,470 |
| 30 | $4,604 | $138,120 |
| 100 | $4,235 | $423,500 |
In Stock:3506 PCS
STM32F102C8T6 Descrição geral
The STM32F102xx medium-density USB access line incorporates the high-performance Arm®Cortex®-M3 32-bit RISC core operating at a 48 MHz frequency, high-speed embedded memories (Flash memory of 64 or 128 Kbytes and SRAM of 10 or 16 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (two I2Cs, two SPIs, one USB and three USARTs), one 12-bit ADC and three general-purpose 16-bit timers.The STM32F102xx family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.The STM32F102xx medium-density USB access line is delivered in the LQFP48 7 × 7 mm and LQFP64 10 × 10 mm packages.The STM32F102xx medium-density USB access line microcontrollers are suitable for a wide range of applications.Evaluation board with STM32F103Zx MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.
Características
- Core: Arm® 32-bit Cortex®-M3CPU
- 48 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 WS memory access
- Single-cycle multiplication and hardware division
- Memories
- 64 or 128 Kbytes of Flash memory
- 10 or 16 Kbytes of SRAM
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC
- PLL for CPU clock
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- Debug mode
- Serial wire debug (SWD) and JTAG interfaces
- DMA
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
- 1 × 12-bit, 1.2 µs A/D converter (up to 16 channels)
- Conversion range: 0 to 3.6 V
- Temperature sensor
- Up to 51 fast I/O ports
- 37/51 I/Os all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to six timers
- Three 16-bit timers, each with up to four IC/OC/PWM or pulse counter
- Two watchdog timers (Independent and Window)
- SysTick timer: 24-bit downcounter
- Up to eight communication interfaces
- Up to two I2C interfaces (SMBus/PMBus)
- Up to three USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
- Up to two SPIs (12 Mbit/s)
- One USB 2.0 full speed interface
- CRC calculation unit, 96-bit unique ID
- ECOPACK packages
Especificações
| Parâmetro | Valor | Parâmetro | Valor |
|---|---|---|---|
| Manufacturer: | STMicroelectronics | Product Category: | ARM Microcontrollers - MCU |
| RoHS: | Details | Series: | STM32F102C8 |
| Mounting Style: | SMD/SMT | Package / Case: | LQFP-48 |
| Core: | ARM Cortex M3 | Program Memory Size: | 64 kB |
| Data Bus Width: | 32 bit | ADC Resolution: | 12 bit |
| Maximum Clock Frequency: | 48 MHz | Number of I/Os: | 37 I/O |
| Data RAM Size: | 10 kB | Supply Voltage - Min: | 2 V |
| Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 85 C | Packaging: | Tray |
| Brand: | STMicroelectronics | Data RAM Type: | SRAM |
| Height: | 1.4 mm | Interface Type: | I2C, SPI, USART, USB |
| Length: | 7 mm | Moisture Sensitive: | Yes |
| Number of ADC Channels: | 10 Channel | Number of Timers/Counters: | 3 Timer |
| Processor Series: | ARM Cortex M | Product Type: | ARM Microcontrollers - MCU |
| Program Memory Type: | Flash | Factory Pack Quantity: | 1500 |
| Subcategory: | Microcontrollers - MCU | Tradename: | STM32 |
| Width: | 7 mm |
Envio
| Tipo de envio | Taxa de envio | Tempo de espera | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
| Termos de pagamento | Taxa de mão | |
|---|---|---|
 |
Transferência bancária | cobrar taxa bancária de US$ 30,00. |
 |
PayPal | cobrar taxa de serviço de 4,0%. |
 |
Cartão de crédito | cobrar taxa de serviço de 3,5%. |
 |
Western Union | charge US.00 banking fee. |
 |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
![produtos]( "produtos")
Etapa1 :produtos
-
![Embalagem a vácuo]( "Embalagem a vácuo")
Etapa2 :Embalagem a vácuo
-
![Saco antiestático]( "Saco antiestático")
Etapa3 :Saco antiestático
-
![Embalagem individual]( "Embalagem individual")
Etapa4 :Embalagem individual
-
![Caixas de embalagem]( "Caixas de embalagem")
Etapa5 :Caixas de embalagem
-
![etiqueta de envio com código de barras]( "etiqueta de envio com código de barras")
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Part points
-
The STM32F102C8T6 is a microcontroller based on the ARM Cortex-M3 core. It features 64 KB of Flash memory, 8 KB of RAM, and various peripherals like GPIO, timers, UART, SPI, I2C, ADC, and more. It is commonly used in applications requiring low power consumption and real-time control.
-
Equivalent
Some equivalent products of the STM32F102C8T6 chip include STM32F103C8T6, STM32F105C8T6, and STM32F107C8T6. These chips are part of the same STM32F1 series microcontrollers from STMicroelectronics, offering similar features and functionality. -
Features
The STM32F102C8T6 is a microcontroller from STMicroelectronics. It features a 32-bit ARM Cortex-M3 core operating at up to 72 MHz, 64KB flash memory, 8KB RAM, and various peripherals such as UART, SPI, I2C, ADC, and timers. It is suitable for a wide range of applications requiring real-time processing and connectivity. -
Pinout
The STM32F102C8T6 is a microcontroller with a LQFP64 package. It has 64 pins. The function of each pin can vary, depending on the specific configuration and usage of the microcontroller. The pinout and functions can be found in the datasheet provided by the manufacturer. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F102C8T6. It is a multinational semiconductor company that designs, develops, and manufactures a range of electronic components, including microcontrollers like the STM32 series. It provides integrated circuits and solutions for various industries, such as automotive, industrial, consumer electronics, and telecommunications. -
Application Field
The STM32F102C8T6 is widely used in various application areas, including industrial automation, consumer electronics, and medical devices. It is commonly found in products such as motor control systems, set-top boxes, fitness trackers, and blood glucose meters. Its versatility, low power consumption, and rich peripheral options make it suitable for a wide range of applications. -
Package
The STM32F102C8T6 chip comes in a LQFP (Low-Profile Quad Flat Package) package type. It has a form factor of 48 pins and a size of 7 mm x 7 mm.
Ficha de dados PDF
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
![produtos]( "produtos")
Temos produtos ricos que podem atender às suas diversas necessidades.
-
![quantity]( "quantity")
A quantidade mínima de pedido começa em 1 unidade.
-
![shipping]( "shipping")
A menor taxa de envio internacional começa em US$ 0,00
-
![garantia]( "garantia")
365 dias de garantia de qualidade para todos os produtos
Components arrived in good condition, but shipping time was longer than expected.