MT29C8G96MAZBBDKD-48 IT

MT29C8G96MAZBBDKD-48 IT Descrição geral

When it comes to memory modules for servers and high-performance computing, Micron Technology's MT29C8G96MAZBBDKD-48 IT stands out as a top contender. With an 8GB capacity and a data transfer rate of up to 3200 MT/s, this DDR4 SDRAM module delivers the speed and reliability required for memory-intensive tasks. Operating at a voltage of 1.2V, it offers efficient power usage without compromising on performance. The MT29C8G96MAZBBDKD-48 IT is meticulously crafted using high-quality components and undergoes rigorous testing to ensure stability and longevity. Compliant with JEDEC standards, it boasts wide compatibility with systems that support DDR4 memory, making it a versatile and dependable choice for a variety of applications. Whether it's handling demanding workloads in data centers or multitasking in cloud computing environments, the MT29C8G96MAZBBDKD-48 IT excels at delivering the capacity, speed, and reliability required for memory-intensive tasks

Características

• Open NAND Flash Interface (ONFI) 1.0-compliant1
• Single-level cell (SLC) technology
• Organization
• – Page size x8: 2112 bytes (2048 + 64 bytes)
• – Page size x16: 1056 words (1024 + 32 words)
• – Block size: 64 pages (128K + 4K bytes)
• – Plane size: 2 planes x 2048 blocks per plane
• – Device size: 4Gb: 4096 blocks; 8Gb: 8192 blocks 16Gb: 16,384 blocks
• Asynchronous I/O performance
• – tRC/tWC: 20ns (3.3V), 25ns (1.8V)
• Array performance
• – Read page: 25µs 3
• – Program page: 200µs (TYP: 1.8V, 3.3V)3
• – Erase block: 700µs (TYP)
• Command set: ONFI NAND Flash Protocol
• Advanced command set
• – Program page cache mode4
• – Read page cache mode 4
• – One-time programmable (OTP) mode
• – Two-plane commands 4
• – Interleaved die (LUN) operations
• – Read unique ID
• – Block lock (1.8V only)
• – Internal data move
• Operation status byte provides software method for detecting
• – Operation completion
• – Pass/fail condition
• – Write-protect status
• Ready/Busy# (R/B#) signal provides a hardware method of detecting operation completion
• WP# signal: Write protect entire device
• First block (block address 00h) is valid when ship ped from factory with ECC. For minimum required ECC, see Error Management.
• Block 0 requires 1-bit ECC if PROGRAM/ERASE cycles are less than 1000
• RESET (FFh) required as first command after power-on
• Alternate method of device initialization (Nand_In it) after power up (contact factory)
• Internal data move operations supported within the plane from which data is read
• Quality and reliability
• – Data retention: 10 years
• – Endurance: 100,000 PROGRAM/ERASE cycles
• Operating voltage range
• – VCC: 2.7–3.6V
• – VCC: 1.7–1.95V
• Operating temperature:
• – Commercial: 0°C to +70°C
• – Industrial (IT): –40ºC to +85ºC
• Package
• – 48-pin TSOP type 1, CPL2
• – 63-ball VFBGA

Especificações