NXP MCF5282CVM66

MCF5282CVM66 Descrição geral

Coldfire V2 MCF528x Microcontroller IC 32-Bit Single-Core 66MHz 512KB (512K x 8) FLASH 256-MAPBGA (17x17)

Características

• ColdFire V2 Core
  The microcontroller is built around the ColdFire V2 core, a 32-bit RISC architecture known for its efficient and streamlined instruction set.
• Integrated Ethernet, CAN, and Flash
  Features integrated 10/100 Mbps Ethernet MAC, making it suitable for networking applications.
  Equipped with a FlexCAN 2.0B module for Controller Area Network (CAN) communication.
  Flash memory for program storage, facilitating non-volatile storage of firmware.
• Advanced Communications
  The microcontroller offers advanced communication features, including a Fast Ethernet controller (FEC) for high-speed network connectivity.
  Multiple UARTs with direct memory access (DMA) capability for serial communication.
  I2C module that is fully compatible with the industry-standard I2C bus.
  Queued serial peripheral interface (QSPI) for efficient serial data transfer.
• Peripheral Set
  Three universal asynchronous receivers/transmitters (UARTs) enhance serial communication capabilities.
  Queued analog-to-digital converter (QADC) for efficient and precise analog signal conversion.
  Four 32-bit DMA timers and two 4-channel general-purpose timers for accurate timing and control.
  Four Periodic Interrupt Timers (PITs) for periodic events and scheduling.
• Processor Core Architecture
  The processor core comprises two separate pipelines decoupled by an instruction buffer.
  Two-stage instruction fetch pipeline (IFP) handles instruction-address generation and fetch.
  Operand Execution Pipeline (OEP) includes two stages for instruction decoding, operand selection, and execution.
• Performance
  ColdFire V2 core delivers 76 MIPS (Dhrystone 2.1) at 80MHz when running from cache/RAM.
  2KB of integrated instruction and data cache for improved performance.
• System Support
  System debug support for troubleshooting and development.
  Power-on reset (POR), external reset, and software reset options.
  Phase-locked loop (PLL) for clock generation and synchronization.
• Clock Speed
  The MCF5282CVM66 typically operates at a clock speed of 66 MHz, providing ample processing power for various embedded applications.
• Memory
  It has integrated Flash memory for program storage and SRAM for data storage. The specific memory sizes may vary depending on the version of the microcontroller.
• Peripherals
  The microcontroller includes a range of peripherals and I/O options, which can include UARTs (serial communication ports), GPIO (general-purpose input/output) pins, timers, PWM controllers, SPI and I2C interfaces, and more.
• Connectivity
  It may support various communication interfaces such as Ethernet, CAN (Controller Area Network), and UARTs, making it suitable for networking and communication applications.
• Operating Voltage
  The MCF5282CVM66 typically operates at a supply voltage of 3.3V.
• Operating Temperature Range
  It is designed to operate within a specified temperature range, which may vary depending on the grade or version of the microcontroller.
• Package
  The "CVM66" in the part name likely refers to the package type, indicating a 144-pin LQFP (Low-Profile Quad Flat Package) package with a 0.5mm pitch.
• Development Tools
  NXP provides development tools and software support for their ColdFire microcontrollers, which includes software development kits (SDKs), compilers, and debugging tools.

Block Diagram

Aplicativo

• Industrial Automation: The microcontroller can be used in industrial control systems, including programmable logic controllers (PLCs), to monitor and control manufacturing processes, machinery, and equipment. It can handle tasks such as data acquisition, sensor interfacing, and process control.
• Motor Control: The MCF5282CVM66 is well-suited for motor control applications, including motor drives for robotics, conveyor systems, and industrial automation. It can control various types of motors, including DC motors, stepper motors, and servo motors.
• Networking Equipment: With built-in Ethernet and communication interfaces, this microcontroller can be used in networking equipment such as switches, routers, and gateways. It can handle data processing, network management, and protocol handling.
• Automotive Systems: In automotive applications, the MCF5282CVM66 can be used for tasks like engine control, transmission control, airbag systems, and dashboard instrumentation. It meets the stringent requirements of the automotive industry.
• Medical Devices: The microcontroller can be used in various medical devices, including patient monitors, infusion pumps, and diagnostic equipment. Its reliability and real-time capabilities are valuable in healthcare applications.
• Consumer Electronics: It can be employed in consumer electronics products such as home automation controllers, smart appliances, and multimedia devices that require embedded control and connectivity features.
• Embedded Systems: The microcontroller is suitable for a wide range of embedded systems, including embedded computers, control panels, and human-machine interfaces (HMIs).
• IoT (Internet of Things): For IoT applications, the MCF5282CVM66 can be used in edge devices that collect data from sensors and transmit it over the network. It is capable of handling various IoT protocols and interfaces.
• Security Systems: It can be used in security and access control systems, such as door access control, alarm systems, and surveillance cameras.
• Agriculture: In agricultural applications, the microcontroller can be used for precision farming, automated irrigation systems, and monitoring environmental conditions.
• Energy Management: The MCF5282CVM66 can be employed in energy management systems for monitoring and controlling energy usage in commercial and residential buildings.
• Avionics: In aviation and aerospace applications, it can be used for control systems in unmanned aerial vehicles (UAVs), drones, and avionics equipment.
• Instrumentation: It is suitable for test and measurement equipment, data loggers, and scientific instruments that require real-time data processing and control.
• Robotics: The microcontroller can be used for controlling various aspects of robotics, including motion control, sensors, and communication with external devices.
• Audio and Multimedia: It can be used in audio processing applications, including MP3 decoding, audio streaming, and multimedia devices.

MCF5282CVM66 Equivalent Parts

Microchip PIC32 Series: Microchip offers a range of 32-bit PIC microcontrollers, such as the PIC32MX and PIC32MZ series, which are suitable for a variety of embedded control applications. These microcontrollers come with different configurations, including Ethernet and USB connectivity options.

STMicroelectronics STM32 Series: STMicroelectronics' STM32 series of microcontrollers are widely used in the industry. The STM32F7 and STM32H7 families, in particular, offer high performance and various connectivity options, making them potential alternatives.

NXP/Freescale Kinetis Series: NXP (formerly Freescale) offers the Kinetis series of microcontrollers, which includes options with Ethernet and various communication interfaces. The Kinetis K6x series, for example, can be considered for similar applications.

Renesas RX Series: Renesas offers the RX series of microcontrollers, which are suitable for industrial and automotive applications. The RX600 series, in particular, provides high performance and connectivity options.

Texas Instruments Tiva C Series: Texas Instruments' Tiva C series of microcontrollers are known for their connectivity features. The TM4C129x series, in particular, offers Ethernet connectivity and a wide range of peripherals.

Cypress PSoC Series: Cypress Semiconductor's PSoC (Programmable System-on-Chip) series offers configurable microcontrollers with various communication interfaces and analog capabilities. The PSoC 6 series, for example, provides flexibility in design.

MCF5216CVM66 vs MCF5282CVF66 

Especificações