NXP LPC2210

LPC2210 Descrição geral

General descriptionThe LPC2210/2220 microcontrollers are based on a 32/16 bit ARM7TDMI-S CPU with real-time emulation and embedded trace support. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.FeaturesKey features■ 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 and TFBGA144 package.■ 16/64 kB on-chip static RAM (LPC2210/2220).■ Serial boot-loader using UART0 provides in-system download and programming capabilities.■ EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with the on-chip RealMonitor software as well as high speed real-time tracing of instruction execution.■ Eight channel 10-bit A/D converter with conversion time as low as 2.44 µs.■ Two 32-bit timers (LPC2220 also external event counters) with four capture and four compare channels, PWM unit (six outputs), Real-Time Clock (RTC) and watchdog.■ Multiple serial interfaces including two UARTs (16C550), Fast I2C-bus (400 kbit/s) and two SPIs. On the LPC2220 a Synchronous Serial Port (SSP) with data buffers and variable length transfers can be selected to replace one SPI.■ Vectored Interrupt Controller (VIC) with configurable priorities and vector addresses.■ Configurable external memory interface with up to four banks, each up to 16 MB and 8/16/32 bit data width.■ Up to 76 general purpose I/O pins (5 V tolerant). Up to nine edge or level sensitive external interrupt pins available.■ 60/75 MHz (LPC2210/2220) maximum CPU clock available from programmable on-chip Phase-Locked Loop (PLL) with settling time of 100 µs.■ On-chip integrated oscillator operates with external crystal in range of 1 MHz to 30 MHz and with external oscillator up to 50 MHz.■ Power saving modes include Idle and Power-down.■ Processor wake-up from Power-down mode via external interrupt.■ Individual enable/disable of peripheral functions for power optimization.■ Dual power supply:   ◆ CPU operating voltage range of 1.65 V to 1.95 V (1.8 V ± 0.15 V).   ◆ I/O power supply range of 3.0 V to 3.6 V (3.3 V ± 10 %) with 5 V tolerant I/O pads. 16/32-bit ARM7TDMI-S processor.

Características

• ARM7TDMI-S core running at up to 60 MHz
• 128 kB to 512 kB of flash memory
• 16 kB to 64 kB of on-chip SRAM
• Multiple communication interfaces such as UART, SPI, I2C, and CAN
• Multiple timers for various timing and control functions
• Analog peripherals including ADC and DAC
• GPIO pins for general-purpose input/output operations
• Integrated on-chip bootloader for easy programming
• Low power consumption with multiple power-saving modes

Aplicativo

• The LPC2210 microcontroller is widely used in various embedded control applications, including:
• Industrial control systems
• Motor control applications
• Robotics
• Home automation
• Automotive electronics
• Medical devices
• Consumer electronics
• Internet of Things (IoT) devices

Especificações