As imagens são apenas para referência. Consulte as especificações do produto
Pedidos acima de
$5000Microchip DSPIC33EV64GM004-I/P8
Low-power, high-speed processing and memory solution
Marcas: Microchip Technology, Inc
Parte do fabricante #: DSPIC33EV64GM004-I/P8
Ficha de dados: DSPIC33EV64GM004-I/P8 Datasheet (PDF)
Pacote/Caso: 48-TQFP
Tipo de Produto: Microcontrollers
Status RoHS:
Condição de estoque: 2.197 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
DSPIC33EV64GM004-I/P8 Descrição geral
dsPIC dsPIC™ 33EV, Functional Safety (FuSa) Microcontroller IC 16-Bit 70MHz 64KB (22K x 24) FLASH 48-TQFP (7x7)
Características
- Operating Conditions
- 4.5V to 5.5V, -40ºC to +85ºC, DC to 70 MIPS
- 4.5V to 5.5V, -40ºC to +125ºC, DC to 60 MIPS
- 4.5V to 5.5V, -40ºC to +150ºC, DC to 40 MIPS
- dsPIC33E Core
- Code-Efficient (C and Assembly) Architecture
- Two 40-Bit Wide Accumulators
- Single-Cycle (MAC/MPY) with Dual Data Fetch
- Single-Cycle, Mixed-Sign MUL plus Hardware Divide
- 32-Bit Multiply Support
- Provides a boot Flash segment in addition to the existing general Flash segment
- Error Code Correction (ECC) for Flash
- Added Two Alternate Register Sets for Fast Context Switching
- Up to Six Pulse-Width Modulation (PWM) Outputs (three generators)
- High-Speed PWM
- Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources
- Dead Time for Rising and Falling Edges
- 8.3 ns PWM Resolution at 60 MIPS,
- 16.6 ns Center-Aligned mode at 60 MIPS
- PWM support DC/DC, AC/DC, inverters, Power Factor Correction (PFC) and lighting
- PWM support Brushless Direct Current (BLDC), Permanent Magnet Synchronous Motor (PMSM), AC Induction Motor (ACIM), Switched Reluctance Motor (SRM)
- Programmable Fault inputs
- Flexible trigger configurations for Analog-to-Digital conversion
- Independent Time Base
- Supports PWM lock, PWM output chopping and dynamic phase shifting
- Integrated Analog Features
- ADC configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
- Up to 36 analog inputs
- Flexible and Independent ADC Trigger Sources
- Up to Four Op Amp/Comparators with Direct Connection to the ADC module:
- Additional dedicated comparator and 7-bit Digital-to-Analog Converter (DAC)
- Programmable references with 128 voltage points
- Programmable blanking and filtering
- Charge Time Measurement Unit
- Supports mTouch™ capacitive touch sensing
- Provides high-resolution time measurement (1 ns)
- On-chip temperature measurement
- Temperature sensor diode
- Multiple sources of edge input triggers
- Timers/Output Compare/Input Capture
- Up to nine general purpose timers
- Five 16-bit or up to two 32-bit timers/counters, Timer3 can provide ADC trigger
- Oscillator Frequency Monitoring through CTMU
- Four Output Capture modules configurable as timers/counters
- Four Input Capture modules
- Communication Interfaces
- Support for LIN/J2602 bus support and IrDA®
- High and low speed (SCI)
- 25 Mbps data rate without PPS used
- One I2C™ module (up to 1 Mbaud) with SMBus Support
- Two SENT J2716 (Single Edge Nibble Transmission-Transmit/Receive) module for Automotive Applications
- Direct Memory Access (DMA)
- 4-Channel DMA with User-Selectable Priority Arbitration
- Universal Asynchronous Receiver/Transmitter (UART), Serial Peripheral Interface (SPI), ADC, Input Capture, Output Compare
- Qualification and Class B Support
- AEC-Q100 Grade 1 (-40ºC to +125ºC)
- AEC-Q100 Grade 0 (-40ºC to +150ºC)
- Class B Safety Library, IEC 60730
- Functional Safety Features
- Backup FRC
- Windowed WDT uses LPRC
- Windowed Deadman Timer uses System Clock (System Windowed Watchdog Timer)
- H/W Clock Monitor Circuit
- Dedicated PWM Fault Pin
- Lockable Clock Configuration
- Functional Safety support (ISO26262)
- ASIL-B & ASIL-C focused applications
- FMEDA and Safety manual available under NDA upon request to your sales office
- Safety qualified XC16 compiler
- Functional Safety hardware features
- Flash with Error Correction Code (ECC)
- CodeGuard™ Memory Protection
- On-chip Regulator for CPU
- Backup FRC and redundant clock sources
- Fail Safe Clock Monitor
- Windowed Watchdog Timer (WDT)
- Windowed Deadman Timer (DMT)
- Oscillator Frequency Monitoring through CTMU (OSCI, SYSCLK, FRC, BFRC, LPRC)
- BOR and POR
- Analog peripherals redundancies
- Cyclical Redundancy Check (CRC)
- Illegal Opcode Detection
- PWM Lock and Dedicated PWM Fault Pin
- Internal Loopback to test communication peripherals and IO ports
- SFR and Configuration Locks
- Address Trap
- Math Error Trap
- Redundant data storage for Flash-based Configuration bits and Peripheral Pin Select (PPS) Configuration bits
Especificações
| Parâmetro | Valor | Parâmetro | Valor |
|---|---|---|---|
| Category | Integrated Circuits (ICs)EmbeddedMicrocontrollers | Mfr | Microchip Technology |
| Series | dsPIC™ 33EV, Functional Safety (FuSa) | Package | Tray |
| Product Status | Active | Core Processor | dsPIC |
| Core Size | 16-Bit | Speed | 70MHz |
| Connectivity | I²C, IrDA, LINbus, SPI, UART/USART | Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Number of I/O | 35 | Program Memory Size | 64KB (22K x 24) |
| Program Memory Type | FLASH | EEPROM Size | - |
| RAM Size | 8K x 8 | Voltage - Supply (Vcc/Vdd) | 4.5V ~ 5.5V |
| Data Converters | A/D 24x10/12b; D/A 1x7b | Oscillator Type | Internal |
| Operating Temperature | -40°C ~ 85°C (TA) | Mounting Type | Surface Mount |
| Package / Case | 48-TQFP | Supplier Device Package | 48-TQFP (7x7) |
| Base Product Number | DSPIC33EV64GM004 | Manufacturer: | Microchip |
| Product Category: | Digital Signal Processors & Controllers - DSP, DSC | RoHS: | Details |
| Product: | DSCs | Series: | dsPIC33EV64GM004 |
| Tradename: | dsPIC | Mounting Style: | SMD/SMT |
| Package / Case: | TQFP-48 | Core: | dsPIC33E |
| Number of Cores: | 1 Core | Maximum Clock Frequency: | 70 MHz |
| L1 Cache Instruction Memory: | - | L1 Cache Data Memory: | - |
| Program Memory Size: | 64 kB | Data RAM Size: | 8 kB |
| Operating Supply Voltage: | 5 V | Minimum Operating Temperature: | - 40 C |
| Maximum Operating Temperature: | + 85 C | Qualification: | AEC-Q100 |
| Packaging: | Tray | Brand: | Microchip Technology |
| Data Bus Width: | 16 bit | Interface Type: | GPIO, I2C, LIN, PWM, SENT, SPI, UART, USART |
| Moisture Sensitive: | Yes | Number of I/Os: | 35 I/O |
| Number of Timers/Counters: | 5 x 16 bit, 2 x 32 bit | Processor Series: | dsPIC33EV |
| Product Type: | DSP - Digital Signal Processors & Controllers | Program Memory Type: | Flash |
| Factory Pack Quantity: | 250 | Subcategory: | Embedded Processors & Controllers |
| Supply Voltage - Max: | 5.5 V | Supply Voltage - Min: | 4.5 V |
| Watchdog Timers: | Watchdog Timer, Windowed |
Envio
| Tipo de envio | Taxa de envio | Tempo de espera | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
| Termos de pagamento | Taxa de mão | |
|---|---|---|
 |
Transferência bancária | cobrar taxa bancária de US$ 30,00. |
 |
PayPal | cobrar taxa de serviço de 4,0%. |
 |
Cartão de crédito | cobrar taxa de serviço de 3,5%. |
 |
Western Union | charge US.00 banking fee. |
 |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
![produtos]( "produtos")
Etapa1 :produtos
-
![Embalagem a vácuo]( "Embalagem a vácuo")
Etapa2 :Embalagem a vácuo
-
![Saco antiestático]( "Saco antiestático")
Etapa3 :Saco antiestático
-
![Embalagem individual]( "Embalagem individual")
Etapa4 :Embalagem individual
-
![Caixas de embalagem]( "Caixas de embalagem")
Etapa5 :Caixas de embalagem
-
![etiqueta de envio com código de barras]( "etiqueta de envio com código de barras")
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Ficha de dados PDF
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
![produtos]( "produtos")
Temos produtos ricos que podem atender às suas diversas necessidades.
-
![quantity]( "quantity")
A quantidade mínima de pedido começa em 1 unidade.
-
![shipping]( "shipping")
A menor taxa de envio internacional começa em US$ 0,00
-
![garantia]( "garantia")
365 dias de garantia de qualidade para todos os produtos
