Pedidos acima de
$5000TI TLC2558CDW
12 Bit Analog to Digital Converter 7, 8 Input 1 SAR 20-SOIC
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marcas: Texas Instruments
Parte do fabricante #: TLC2558CDW
Ficha de dados: TLC2558CDW Ficha de dados (PDF)
Pacote/Caso: 20-SOIC
Tipo de Produto: Analog to Digital Converters (ADC)
Status RoHS:
Condição de estoque: 5.759 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TLC2558CDW Descrição geral
The TLC2558 and TLC2554 are a family of high-performance, 12-bit low power, 1.6 us, CMOS analog-to-digital converters (ADC) which operate from a single 5 V power supply. These devices have three digital inputs and a 3-state output [chip select (CS\), serial input-output clock (SCLK), serial data input (SDI), and serial data output (SDO)] that provide a direct 4-wire interface to the serial port of most popular host microprocessors (SPI interface). When interfaced with a DSP, a frame sync (FS) signal is used to indicate the start of a serial data frame.
In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip analog multiplexer that can select any analog inputs or one of three internal self-test voltages. The sample-and-hold function is automatically started after the fourth SCLK edge (normal sampling) or can be controlled by a special pin, CSTART\, to extend the sampling period (extended sampling). The normal sampling period can also be programmed as short (12 SCLKs) or as long (24 SCLKs) to accommodate faster SCLK operation popular among high-performance signal processors. The TLC2558 and TLC2554 are designed to operate with very low power consumption. The power-saving feature is further enhanced with software/hardware/auto power down modes and programmable conversion speeds. The converter uses the external SCLK as the source of the conversion clock to achieve higher (up to 1.6 us when a 20 MHz SCLK is used) conversion speed. There is a 4-V internal reference available. An optional external reference can also be used to achieve maximum flexibility.
Características
- Maximum Throughput 400 KSPS
- Built-In Reference and 8× FIFO
- Differential/Integral Nonlinearity Error:
±1 LSB - Signal-to-Noise and Distortion Ratio:
69 dB, fi = 12 kHz - Spurious Free Dynamic Range: 75 dB,
fi = 12 kHz - SPI/DSP-Compatible Serial Interfaces With SCLK up to 20 MHz
- Single Supply 5 Vdc
- Analog Input Range 0 V to Supply Voltage With 500 kHz BW
- Hardware Controlled and Programmable Sampling Period
- Low Operating Current (4 mA at 5.5 V External Ref, 6 mA at 5.5 V, Internal Ref)
- Power Down: Software/Hardware Power-Down Mode (1 uA Max, Ext Ref),
Auto Power-Down Mode (1 uA, Ext Ref) - Programmable Auto-Channel Sweep
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Analog to Digital Converters - ADC |
RoHS | Details | Series | TLC2558 |
Mounting Style | SMD/SMT | Package / Case | SOIC-20 |
Resolution | 12 bit | Number of Channels | 8 Channel |
Interface Type | SPI | Sampling Rate | 400 kS/s |
Input Type | Pseudo-Differential/Single-Ended | Architecture | SAR |
Analog Supply Voltage | 4.5 V to 5.5 V | Digital Supply Voltage | 4.5 V to 5.5 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Brand | Texas Instruments | DNL - Differential Nonlinearity | 1 LSB |
ENOB - Effective Number of Bits | 11.6 bit | Features | Programmable Auto-Channel Sweep |
FPBW - Full Power Bandwidth | 1 MHz | Height | 2.35 mm |
INL - Integral Nonlinearity | 1 LSB | Length | 12.8 mm |
Number of Converters | 1 Converter | Operating Supply Voltage | 4.5 V to 5.5 V |
Power Consumption | 9 mW | Product Type | ADCs - Analog to Digital Converters |
Reference Type | External, Internal | Reference Voltage | 5 V |
SFDR - Spurious Free Dynamic Range | - 84 dB | Shutdown | No Shutdown |
SINAD - Signal to Noise and Distortion Ratio | 71 dB | Factory Pack Quantity | 25 |
Subcategory | Data Converter ICs | Supply Voltage - Max | 5.5 V |
Supply Voltage - Min | 4.5 V | THD - Total Harmonic Distortion | - 82 dB |
Type | Precision ADC | Width | 7.52 mm |
Unit Weight | 0.018953 oz |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
![]() |
Transferência bancária | cobrar taxa bancária de US$ 30,00. |
![]() |
PayPal | cobrar taxa de serviço de 4,0%. |
![]() |
Cartão de crédito | cobrar taxa de serviço de 3,5%. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos