Pedidos acima de
$5000TI TL031IP
Precision Amplifiers Enhanced JFET Low-Power Precision
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
Marcas: Texas Instruments
Parte do fabricante #: TL031IP
Ficha de dados: TL031IP Ficha de dados (PDF)
Pacote/Caso: 8-PDIP
Tipo de Produto: Instrumentation, OP Amps, Buffer Amps
Status RoHS:
Condição de estoque: 6.938 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
TL031IP Descrição geral
The TL03x series of JFET-input operational amplifiers offer improved dc and ac characteristics over the TL06x family of low-power BiFET operational amplifiers. On-chip zener trimming of offset voltage yields precision grades as low as 1.5 mV (TL031A) for greater accuracy in dc-coupled applications. The Texas Instruments improved BiFET process and optimized designs also yield improved bandwidths and slew rates without increased power consumption. The TL03x devices are pin-compatible with the TL06x and can be used to upgrade existing circuits or for optimal performance in new designs.
BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors without sacrificing the output drive associated with bipolar amplifiers. This higher input impedance makes the TL3x amplifiers better suited for interfacing with high-impedance sensors or very low-level ac signals. These devices also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.
The TL03x family has been optimized for micropower operation, while improving on the performance of the TL06x series. Designers requiring significantly faster ac response should consider the Excalibur TLE206x family of low-power BiFET operational amplifiers.
Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input-voltage limits and output swing when operating from a single supply. DC biasing of the input signal is required, and loads should be terminated to a virtual-ground node at midsupply. The TI TLE2426 integrated virtual-ground generator is useful when operating BiFET amplifiers from single supplies.
The TL03x devices are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, the TI LinCMOS families of operational amplifiers (TLC prefix) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate, bandwidth requirements, and output loading.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from 40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of 55°C to 125°C.
Características
- Direct Upgrades for the TL06x Low-Power BiFETs
- Low Power Consumption . . . 6.5 mW/Channel Typ
- On-Chip Offset-Voltage Trimming for Improved DC Performance (1.5 mV, TL031A)
- Higher Slew Rate and Bandwidth Without Increased Power Consumption
- Available in TSSOP for Small Form-Factor Designs
Excalibur is a trademark of Texas Instruments.
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Precision Amplifiers |
RoHS | Details | Series | TL031 |
Number of Channels | 1 Channel | GBP - Gain Bandwidth Product | 1.1 MHz |
SR - Slew Rate | 5.1 V/us | CMRR - Common Mode Rejection Ratio | 94 dB |
Output Current per Channel | 40 mA | Ib - Input Bias Current | 2 pA |
Vos - Input Offset Voltage | 500 uV | en - Input Voltage Noise Density | 41 nV/sqrt Hz |
Supply Voltage - Max | 30 V | Supply Voltage - Min | 10 V |
Operating Supply Current | 217 uA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Shutdown | No Shutdown |
Mounting Style | Through Hole | Package / Case | PDIP-8 |
Amplifier Type | Low Power Amplifier | Brand | Texas Instruments |
Dual Supply Voltage | +/- 9 V, +/- 12 V | Height | 4.57 mm |
In - Input Noise Current Density | 0.003 pA/sqrt Hz | Input Type | Rail-to-Rail |
Length | 9.81 mm | Maximum Dual Supply Voltage | +/- 15 V |
Minimum Dual Supply Voltage | +/- 5 V | Operating Supply Voltage | 10 V to 30 V, +/- 5 V to +/- 15 V |
Product | Precision Amplifiers | Product Type | Precision Amplifiers |
Factory Pack Quantity | 50 | Subcategory | Amplifier ICs |
Supply Type | Single, Dual | Technology | BiFET |
Vcm - Common Mode Voltage | Negative Rail + 3.5 V to Positive Rail - 1 V | Voltage Gain dB | 81.58 dB |
Width | 6.35 mm |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
![]() |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
![]() |
Transferência bancária | cobrar taxa bancária de US$ 30,00. |
![]() |
PayPal | cobrar taxa de serviço de 4,0%. |
![]() |
Cartão de crédito | cobrar taxa de serviço de 3,5%. |
![]() |
Western Union | charge US.00 banking fee. |
![]() |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos