ST STM32F103ZFT6
ARM Microcontrollers - MCU XL-Density Access Line 32-Bit 768 Kb
Marcas: STMicroelectronics, Inc
Parte do fabricante #: STM32F103ZFT6
Ficha de dados: STM32F103ZFT6 Datasheet (PDF)
Pacote/Caso: LQFP-144
Tipo de Produto: Processadores e controladores incorporados
Status RoHS:
Condição de estoque: 2226 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Adicionar à lista técnicaSTM32F103ZFT6 Descrição geral
The STM32F103xF and STM32F103xG performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 1 Mbyte and SRAM up to 96 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, ten general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xF/G XL-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F103xF/G high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems and video intercom.
Características
- Core: ARM® 32-bit Cortex®-M3 CPU with MPU
- 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 768 Kbytes to 1 Mbyte of Flash memory
- 96 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBATsupply for RTC and backup registers
- 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
- Conversion range: 0 to 3.6 V
- Triple-sample and hold capability
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller
- Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M3 Embedded Trace Macrocell™
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 17 timers
- Up to ten 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- U
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
Pin Count | 144 | Package Category | Quad Flat Packages |
Released Date | Jul 22, 2015 |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
Transferência bancária | cobrar taxa bancária de US$ 30,00. | |
PayPal | cobrar taxa de serviço de 4,0%. | |
Cartão de crédito | cobrar taxa de serviço de 3,5%. | |
Western Union | charge US.00 banking fee. | |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Part points
-
The STM32F103ZFT6 chip is a 32-bit microcontroller based on the ARM Cortex-M3 architecture. It offers a wide range of features and peripherals, making it suitable for various applications. With its high computing power, low power consumption, and extensive connectivity options, the STM32F103ZFT6 is widely used in industrial control systems, consumer electronics, and other embedded applications.
-
Equivalent
Some equivalent products of the STM32F103ZFT6 chip include STM32F103ZET6, STM32F103ZEY6, and STM32F103VET6. These chips belong to the same STM32F1 series and have similar features and specifications. -
Features
The STM32F103ZFT6 is a microcontroller with the ARM Cortex-M3 core, operating at a frequency of up to 72 MHz. It has a 512 KB Flash memory, 64 KB SRAM, and various digital and analog peripherals. It supports multiple communication interfaces like UART, SPI, and I2C, and has a 12-bit ADC for analog data conversion. -
Pinout
The STM32F103ZFT6 microcontroller has 144 pins. It is part of the STM32F1 series and is based on the ARM Cortex-M3 core. It features various peripherals such as GPIO, SPI, I2C, UART, and more. It is commonly used in applications that require high performance and connectivity. -
Manufacturer
STMicroelectronics is the manufacturer of the STM32F103ZFT6 microcontroller. It is a leading multinational semiconductor company that designs, develops, and manufactures a wide range of electronic components and systems. STMicroelectronics specializes in providing solutions for various industries including automotive, industrial, personal electronics, and telecommunications, among others. -
Application Field
The STM32F103ZFT6 microcontroller has a wide range of applications, including industrial automation, consumer electronics, medical devices, and automotive systems. It provides a powerful ARM Cortex-M3 processor, ample memory, and various peripherals, making it suitable for diverse and demanding embedded system designs. -
Package
The STM32F103ZFT6 chip is available in a LQFP (Low-profile Quad Flat Package) package type. Its form is QFP (Quad Flat Package), and it has a size of 10mm x 10mm.
Ficha de dados PDF
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos
Ovaga's customer service is top-notch. They were able to answer all of my questions with ease.