ST STM32F103RET7
ARM® Cortex®-M3 STM32F1 Microcontroller IC 32-Bit Single-Core 72MHz 512KB (512K x 8) FLASH 64-LQFP (10x10)
Marcas: STMicroelectronics, Inc
Parte do fabricante #: STM32F103RET7
Ficha de dados: STM32F103RET7 Datasheet (PDF)
Pacote/Caso: LQFP64
Tipo de Produto: Processadores e controladores incorporados
Status RoHS:
Condição de estoque: 3222 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Adicionar à lista técnicaSTM32F103RET7 Descrição geral
The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.The STM32F103xC/D/E high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.These features make the STM32F103xC/D/E high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems video intercom, and HVAC.STM32 Nucleo-64 development board with STM32F103.Evaluation board with STM32F103Zx MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.
Características
- Core: ARM® 32-bit Cortex®-M3 CPU
- 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- up to 64 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
- Conversion range: 0 to 3.6 V
- Triple-sample and hold capability
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller
- Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M3 Embedded Trace Macrocell™
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
- Up to 11 timers
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
- 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
feature-data-bus-width-bit | 32 | feature-minimum-operating-supply-voltage-v | 2 |
feature-maximum-operating-supply-voltage-v | 3.6 | feature-interface-type | CAN/I2C/SPI/USART/USB |
feature-tradename | feature-packaging | Tray | |
feature-rad-hard | feature-pin-count | 64 | |
feature-supplier-package | LQFP | feature-standard-package-name1 | QFP |
feature-cecc-qualified | No | feature-esd-protection | Yes |
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc | No |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
Transferência bancária | cobrar taxa bancária de US$ 30,00. | |
PayPal | cobrar taxa de serviço de 4,0%. | |
Cartão de crédito | cobrar taxa de serviço de 3,5%. | |
Western Union | charge US.00 banking fee. | |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Part points
-
The STM32F103RET7 is a microcontroller chip from STMicroelectronics. It belongs to the STM32F1 series and is based on the ARM Cortex-M3 processor. It offers various features such as extensive connectivity options, multiple timers, analog-to-digital converters, and advanced peripheral functions. It is commonly used in various embedded applications and offers a balance between performance and power consumption.
-
Equivalent
STM32F103RET7 is a microcontroller chip from STMicroelectronics. It is part of the STM32F103 series. The equivalent products in this series are STM32F103RBT6, STM32F103RCT6, STM32F103RDT6, and STM32F103RFT6. These chips share similar features and performance characteristics. -
Features
The STM32F103RET7 is a microcontroller featuring a ARM Cortex-M3 core, operating at up to 72MHz. It has 512KB Flash memory and 64KB RAM, along with a wide range of peripherals such as USB, UART, SPI, I2C, and ADC. It also supports up to 80 GPIO pins, making it suitable for a variety of applications. -
Pinout
The STM32F103RET7 is a microcontroller with 64 pins. It is part of the STM32F1 series and offers multiple functions including digital input/output, timers, serial communication interfaces, analog-to-digital converters, and more. It is commonly used in various embedded systems applications. -
Manufacturer
The manufacturer of the STM32F103RET7 is STMicroelectronics. It is a multinational semiconductor company known for designing and manufacturing microcontrollers, integrated circuits, and various semiconductor solutions. STMicroelectronics caters to a wide range of industries, including automotive, industrial, consumer electronics, and communications, supplying components and technology for various applications. -
Application Field
The STM32F103RET7 microcontroller has application in various areas including industrial control systems, home appliances, motor control, power management, and communication devices. It is commonly used in applications that require high performance, low power consumption, and advanced connectivity options. -
Package
The STM32F103RET7 chip is packaged in a BGA (Ball Grid Array) package form, with a size of 64 pins.
Ficha de dados PDF
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos
Highly impressed with the quick shipping and exceptional customer service.