Pedidos acima de
$5000Microchip PIC24FJ128GL406-I/MR
16-bit Microcontrollers - MCU 16-Bit, 16 MIPS, 128KB ECC Flash, 32KB RAM, LCD, 60-pin
Marcas: Microchip Technology, Inc
Parte do fabricante #: PIC24FJ128GL406-I/MR
Ficha de dados: PIC24FJ128GL406-I/MR Datasheet (PDF)
Pacote/Caso: QFN
Tipo de Produto: Microcontrollers
Status RoHS:
Condição de estoque: 2.912 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
PIC24FJ128GL406-I/MR Descrição geral
ThePIC24FJ ‘GU4/GL4’ family offers up to 512KB of Dual Partition Flash supporting real-timeOver-The-Air (OTA) updates and EEPROM Emulation. Along with a number of coreindependent peripherals (CIPs), it includes a full speed USB and a segmentedLCD controller with animation support. With high memory and sleep current downto a few hundreds of nA while retaining the complete RAM content, this family is perfect for IoT, Industrial,Consumer and Medical applications.
Supportedin the MPLAB® Code Configurator (MCC) tool, the development time getssignificantly reduced by allowing you to configure the devices and librarieswith just a few clicks. To address the evolving focus on safety and security,these MCUs offer hardware safety features and secure protection schemes,simplifying design of smart, safe, secure and connected applications. TheseMCUs feature protection schemes such as Flash OTP by ICSP™ Write Inhibit whichallows the entire Flash to be configured as One-Time-Programmable (OTP) memoryand CodeGuard™ Flash Security which facilitates to segment the memory andimplement access restrictions. These features together with ourCryptoAuthentication™ chips enable you to implement security in yourapplications. Offering an extended operating temperature of up to 125°C withAEC Q100 Grade 1 qualification, this family is also well suited for Automotiveand Industrial applications. A range of hardware safety features on this familyfacilitates your application’s compliance with safety requirements. With ahigh-level of analog integration, this family simplifies sensor interfacing andanalog measurement, while reducing the overall system BoM cost.
Características
- Segmented LCD Controller with Animation
- 64 Segments and 8 Commons supporting up to 480 Pixels
- Core independent autonomous animation: Alternating dual display, blinking and blanking
- LCD Charge Pump for contrast management in battery-powered applications
- External bias option for reducing power consumption
- Operation in power-saving modes
- Core and Operating Conditions
- 2.0V to 3.6V, -40°C to 125°C, AEC Q100 Grade 1 qualified, up to 16 MIPS operation
- Single-cycle instruction execution
- 16 x 16 Hardware Multiply, and 32-bit x 16-bit Hardware Divider
- C compiler optimized instruction set system
- eXtreme Low Power
- Ultra-low-power operation with sleep current down to nA with full RAM retention
- A range of power-saving modes to reduce current consumption, while balancing performance: PMD bits, DOZE, Idle, Sleep and Retention Sleep modes
- A range of Core Independent Peripherals (CIPs) that operate in power saving modes, while off-loading the Central Processing Unit (CPU)
- Secure Protection Features
- Flash ‘One Time Programming’ (OTP) by ICSP™ Write Inhibit that offers an ability to disable Flash erase/write/debug operations
- CodeGuard™ Flash protection to manage memory partitions and access restrictions
- 120-bit Unique Device ID, 256 bytes User OTP and the above protection schemes make an ideal combination of complementary features to implement security together with the CryptoAuthentication™ devices in a secure application
- Hardware Safety Features
- Flash with Error Correction Code (ECC) and Fault Injection for memory integrity check (Single error correction and Double error detection)
- Dead-Man Timer (DMT) clocked by instruction fetches for monitoring the health of software
- Windowed WatchDog Timer (WWDT) for system supervision
- CodeGuard™ Flash protection for memory partition and access restriction
- Fail-Safe Clock Monitor (FSCM) for clock fault management
- Enhanced Programmable Cyclic Redundancy Check (CRC), Programmable High-Low Voltage Detect (HLVD), Brown-out Reset (BOR) and Power-on Reset (POR)
- Class B Safety Library, IEC 60730
- Advanced Integrated Analog
- Up to 24-Channel, 400Ksps, 10/12-Bit Analog-to-Digital Converter (ADC)
- Low-voltage boost for input
- Bandgap reference input feature
- Core Independent windowed threshold compare feature
- Auto-scan feature
- Operation in power-saving modes
- Three Analog Comparators with input multiplexing and programmable reference voltage generators
- 1 Msps 10-bit Digital-to-Analog Converter (DAC) with Buffered Output
- Timer/Counters/Output Compare/Input Capture/Pulse Width Modulation
- Eight MCCP modules, each with a Dedicated 16/32-Bit Timer
- Three 6-output MCCP modules
- Five 2-output MCCP modules
- A total of up to 21x 16-bit timers or 10x 32-bit dedicated timer/counters
- Hardware Real-Time Clock Calendar (RTCC) with Timestamping
- Key Core Independent Peripherals
- 4x Configurable Logic Cells (CLCs)
- 8x Multiple Capture Compare PWMs (MCCPs)
- Segmented LCD controller with Core Independent Animation, up to 480 pixels (8 commons x 64 segments)
- ADC controller with threshold compare and automatic triggers
- Direct Memory Access (DMA) with 6 channels, supporting UART, SPI, ADC, and more
- Communication Interfaces
- 6x UARTs supporting LIN/J2602 and IrDA®
- 4x SPI/I2S, up to 24 MHz operation
- 3x I2C Master and Slave w/Address Masking, PMBus™ and IPMI support
- Clock Management
- On-chip 8 MHz Fast RC (FRC), and 32 kHz Low-Power RC (LPRC) and Secondary (SOSC) oscillators
- Programmable PLL with external oscillator clock sources and Reference Clock Output (REFO)
- Fail-Safe Clock Monitor (FSCM)
- Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) supporting two-speed start-up
- Special Features and Debugger Development Support
- MPLAB Code Configurator (MCC) support
- Peripheral Pin Select (PPS) for flexible pin mapping
- Configurable interrupt-on change on all IOs
- In-Circuit Serial Programming™ (ICSP™) and In-Circuit Emulation (ICE) via 2-pins
- JTAG Boundary Scan Support
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
Category | Integrated Circuits (ICs)EmbeddedMicrocontrollers | Mfr | Microchip Technology |
Series | Automotive, AEC-Q100, PIC® 24F | Package | Tube |
Product Status | Active | Core Processor | PIC |
Core Size | 16-Bit | Speed | 32MHz |
Connectivity | I²C, IrDA, LINbus, SPI, UART/USART | Peripherals | DMA, LCD, PWM, WDT |
Program Memory Size | 128KB (128K x 8) | Program Memory Type | FLASH |
EEPROM Size | - | RAM Size | 32K x 8 |
Voltage - Supply (Vcc/Vdd) | 2V ~ 3.6V | Data Converters | A/D 24x10b/12b; D/A 1x10b |
Oscillator Type | External | Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount | Package / Case | 64-VFQFN Exposed Pad |
Supplier Device Package | 64-QFN (9x9) | Base Product Number | PIC24FJ128GL406 |
Manufacturer: | Microchip | Product Category: | 16-bit Microcontrollers - MCU |
RoHS: | Details | Series: | PIC24FJ |
Mounting Style: | SMD/SMT | Package / Case: | QFN-64 |
Core: | PIC24F | Program Memory Size: | 128 kB |
Data Bus Width: | 16 bit | ADC Resolution: | 10 bit, 12 bit |
Maximum Clock Frequency: | 32 MHz | Number of I/Os: | 54 I/O |
Data RAM Size: | 32 kB | Supply Voltage - Min: | 2 V |
Supply Voltage - Max: | 3.6 V | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 85 C | Packaging: | Tube |
Brand: | Microchip Technology | DAC Resolution: | 10 bit |
Data RAM Type: | RAM | Interface Type: | I2C, SPI, UART, USB |
Moisture Sensitive: | Yes | Number of ADC Channels: | 16 Channel |
Number of Timers/Counters: | 5 Timer | Processor Series: | PIC24 |
Product: | USB MCU | Product Type: | 16-bit Microcontrollers - MCU |
Program Memory Type: | Flash | Factory Pack Quantity: | 40 |
Subcategory: | Microcontrollers - MCU |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
Transferência bancária | cobrar taxa bancária de US$ 30,00. | |
PayPal | cobrar taxa de serviço de 4,0%. | |
Cartão de crédito | cobrar taxa de serviço de 3,5%. | |
Western Union | charge US.00 banking fee. | |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Ficha de dados PDF
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos