Microchip PIC18LF14K22-I/P

PIC18LF14K22-I/P Descrição geral

Introducing the nanoWatt XLP PIC18F1XK22 Flashmicrocontroller: not too big, not too small… just right! Thisnew family of devices offer all of the advantages of the wellrecognized PIC18F High Performance MCUs; 8-bit,C compiler optimized architecture and an industry leadingperipheral set now available in a low pin-count option. Thesenew 20-pin products include a 16 MHz precision InternalOscillator which can be used with the standard 4X PLL toproduce 16 MIPS of performance (64 MHz @ 3V).Standard analog peripherals include 12 channels of10-bit A/D, Dual Rail-Rail Comparators with improvedinput/output multiplexing and an on-chip selectable FixedVoltage Reference. Digital peripherals include an EnhancedCapture/Compare/PWM (ECCP+) module with PWM steeringand a Master Synchronous Serial Port (MI2C,SPI) modulewith software controllable address masking. These devicesalso feature the SR Latch mode which supports capacitivesensing applications.In addition to these peripherals, the devices feature severalmicrocontroller monitors that provide for reliable operationincluding BOR (Brown Out Reset) with software enable, POR(Power On Reset) and an Extended WDT. The addition ofnanoWatt XLP technology make these devices ideally suitedfor battery powered applications or designs where powerconsumption is constrained.

Características

• C Compiler optimized architecture
• 256 bytes data EEPROM
• Linear program memory addressing to 16 Kbytes
• Linear data memory addressing to 512 bytes
• Sleep mode: 50 nA, typical
• Watchdog Timer: 600 nA, typical
• Timer1 Oscillator: 800 nA @ 32 kHz, typical
• Factory calibrated to ± 1%
• Software selectable frequencies range of 31 kHz to 16 MHz
• 64 MHz performance available using PLL
• No external components required
• Four crystal modes up to 64 MHz
• Fail-Safe Clock Monitor
• Allows for safe shutdown if peripheral clock stops
• Two-Speed Oscillator Start-up
• Operating voltage 1.8V- 5.5V (with low voltage option 1.8V-3.6V)
• Self-reprogrammable under software control
• Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Programmable Brown-out Reset (BOR)
• Extended Watchdog Timer (WDT) with on-chip oscillator and software enable
• In-Circuit Serial Programming™ (ICSP™) via two pins
• In-Circuit Debug via two pins
• 12 Ch. 10-bit Analog-to-Digital (A/D) Converter module:
• 2 rail-to-rail Analog Comparators module with:
• Programmable on-chip voltage reference (CVREF) module (% of VDD)
• Selectable Fixed voltage reference (FVR) with multiple reference voltages
• High current sink/source 25 mA/25 mA
• Three external interrupt pins
• 3 16-bit timers/counters with prescaler
• 1 8-bit timer/counter with 8-bit period register, prescaler and postscaler
• Programmable dead time
• Auto-shutdown and Auto-restart
• 3-wire SPI (supports all 4 SPI modes)
• I2C™ Master and Slave modes (Slave mode with address masking)
• Supports RS-232, RS-485 and LIN 2.0
• Auto-Baud Detect
• Confi gurable inputs and outputs
• Supports mTouch™ capacitive sensing applications

Especificações