ADI OP27AZ
Precision Amplifiers LOW-NOISE PRECISION OP AM
Marcas: Analog Devices, Inc
Parte do fabricante #: OP27AZ
Ficha de dados: OP27AZ Datasheet (PDF)
Pacote/Caso: CDIP-8
Tipo de Produto: CIs amplificadores
Status RoHS:
Condição de estoque: 3242 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
Adicionar à lista técnicaOP27AZ Descrição geral
The OP279 is a dual rail-to-rail, high output current, single supply amplifier.It is designed for low voltage applications that require either current or capacitive load drive capability.The OP279 can sink and source currents of ±80 mA (typ) and is stable with capacitive loads to 10 nF.
Applications with the benefit from the OP279's high output current include driving headphones, displays, transformers, and power transistors. The powerful output is combined with a unique input stage that maintains very low distortion with wide common-mode range, even in single supply designs.
The OP279 can be used as a buffer to provide much greater drive capability than can usually be provided by CMOS outputs.CMOS ASICs and DACs often have outputs that can swing to both the positive supply and ground, but are incapable of driving greater than a few milliamps.
Bandwith is typically 5 MHz and the slew rate is 3 V/µs, making these amplifiers well suited for single supply applications that require audio bandwidths when used in high gain configurations.Operation is guaranteed from voltages as low as 4.5 V, up to 12 V.
When using the OP279 in +5 volt systems, very good audio performance can be attained.THD is below 0.01% with a 600 Ohm load, and noise is a respectable 21 nV/Hz.Supply current is less than 3.5 mA per amplifier.
The OP279 is available in 8-pin plastic DIP and SO-8 surface mount packages.They are specified over the industrial (-40°C to +80°C) temperature range.
Características
- Rail-to-Rail Inputs and Outputs
- High Output Current: ±60 mA
- Single Supply: 5 V to 12 V
- Wide Bandwidth: 5 MHz
- High Slew Rate: 3 V/±s
- Low Distortion: 0.01%
- Unity-Gain Stable
- No Phase Reversal
- Short-Circuit Protected
- Drives Capacitive Loads: 10 nF
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
Pin Count | 8 | Package Category | Dual-In-Line Packages |
Released Date | Jan 11, 2017 |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
Transferência bancária | cobrar taxa bancária de US$ 30,00. | |
PayPal | cobrar taxa de serviço de 4,0%. | |
Cartão de crédito | cobrar taxa de serviço de 3,5%. | |
Western Union | charge US.00 banking fee. | |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Part points
-
The OP27AZ is a precision operational amplifier integrated circuit that is commonly used in signal conditioning and amplification applications. It offers low input offset voltage, drift, and noise, making it ideal for high-accuracy measurement and sensor interface circuits. Its high open-loop gain and bandwidth make it suitable for a wide range of precision analog circuit designs.
-
Equivalent
Some equivalent products of the OP27AZ chip are AD827, LT1115, and OPA627. These operational amplifier chips offer similar performance characteristics and are commonly used as replacements for the OP27AZ in various applications. -
Features
The OP27AZ is a low-noise precision operational amplifier with high input impedance, low offset voltage, and low input bias current. It features low distortion, high gain bandwidth product, and wide supply voltage range. It is suitable for precision instrumentation, active filters, and precision integrators. -
Pinout
The OP27AZ is a high precision operational amplifier with a pin count of 8. Pin 1 is the offset null, pins 2 and 3 are the inverting input, pins 4 and 7 are the power supply, pin 5 is the non-inverting input, pin 6 is the output, and pin 8 is the offset null. -
Manufacturer
OP27AZ is manufactured by Analog Devices Inc., a multinational semiconductor company specializing in data conversion and signal processing technology. Analog Devices produces a wide range of integrated circuits for various applications including communication, industrial, automotive, and healthcare industries. -
Application Field
The OP27AZ is a precision operational amplifier commonly used in precision instrumentation, data acquisition systems, medical equipment, and audio equipment. It is also used in control systems, test equipment, and signal processing applications that require high accuracy and low noise performance. -
Package
The OP27AZ chip is packaged in a standard 8-pin plastic DIP (Dual Inline Package) form with a size of approximately 9.05mm x 6.13mm x 3.30mm.
Ficha de dados PDF
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos
The selection of components they offer is unrivaled. Always happy with my orders.