As imagens são apenas para referência. Consulte as especificações do produto
Pedidos acima de
$5000Microchip MCP2561FDT-E/SN
1/1 Transceiver CANbus 8-SOIC
Marcas: Microchip Technology, Inc
Parte do fabricante #: MCP2561FDT-E/SN
Ficha de dados: MCP2561FDT-E/SN Datasheet (PDF)
Pacote/Caso: SOIC-8
Tipo de Produto: Drivers, Receivers, Transceivers
Status RoHS:
Condição de estoque: 3.259 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
MCP2561FDT-E/SN Descrição geral
The MCP2561FDT-E/SN from Microchip Technology Inc. represents the next evolution in high-speed CAN transceivers. With its advanced features and improved performance, this second-generation device is well-equipped to handle the demanding requirements of modern automotive systems. Offering enhanced Loop Delay Symmetry and an extended maximum propagation delay, the MCP2561FDT-E/SN ensures seamless communication at higher data rates. Plus, its compliance with automotive standards for CAN FD bit rates, low quiescent current, EMC, and ESD protection make it a top choice for automotive designers seeking a dependable and efficient transceiver solution
Características
- Maximum Propagation Delay: 120 ns
- Loop Delay Symmetry: -10%/+10% (2 Mbps)
- Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements
- AEC-Q100 Grade 0
- Very Low Standby Current (5 μA, typical)
- VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
- SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
- An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
- Permanent Dominant Detection on TXD
- Permanent Dominant Detection on Bus
- Power-on Reset and Voltage Brown-Out Protection on VDD Pin
- Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)
- Protection Against High-Voltage Transients in Automotive Environments
- Automatic Thermal Shutdown Protection
- Suitable for 12V and 24V Systems
- Radiated emissions @ 2 Mbps with Common Mode Choke (CMC)
- DPI @ 2 Mbps with CMC
- High ESD Protection on CANH and CANL, meeting IEC61000-4-2 up to ±14 kV
- Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L
- Extended (E): -40°C to +125°C
- High (H): -40°C to +150°C
Especificações
| Parâmetro | Valor | Parâmetro | Valor |
|---|---|---|---|
| Manufacturer | Microchip Technology | Product Category | Interface - Drivers, Receivers, Transceivers |
| Series | - | Product | CAN Transceivers |
| Type | Transceiver | Packaging | Tape & Reel (TR) Alternate Packaging |
| Unit-Weight | 0.019048 oz | Package-Case | SOIC-8 |
| Operating-Temperature | -40°C ~ 125°C | Mounting-Type | Surface Mount |
| Voltage-Supply | 4.5 V ~ 5.5 V | Supplier-Device-Package | 8-SOIC |
| Protocol | CAN | Data-Rate | 8Mbps |
| Number-of-Drivers-Receivers | 2016/1/1 | Duplex | - |
| Receiver-Hysteresis | 200mV | Operating-Supply-Voltage | 4.5 V to 5.5 V |
| Operating-Supply-Current | 70 mA | Supply-Voltage-Max | 5.5 V |
| Supply-Voltage-Min | 4.5 V |
Envio
| Tipo de envio | Taxa de envio | Tempo de espera | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias |
 |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
| Termos de pagamento | Taxa de mão | |
|---|---|---|
 |
Transferência bancária | cobrar taxa bancária de US$ 30,00. |
 |
PayPal | cobrar taxa de serviço de 4,0%. |
 |
Cartão de crédito | cobrar taxa de serviço de 3,5%. |
 |
Western Union | charge US.00 banking fee. |
 |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
![produtos]( "produtos")
Etapa1 :produtos
-
![Embalagem a vácuo]( "Embalagem a vácuo")
Etapa2 :Embalagem a vácuo
-
![Saco antiestático]( "Saco antiestático")
Etapa3 :Saco antiestático
-
![Embalagem individual]( "Embalagem individual")
Etapa4 :Embalagem individual
-
![Caixas de embalagem]( "Caixas de embalagem")
Etapa5 :Caixas de embalagem
-
![etiqueta de envio com código de barras]( "etiqueta de envio com código de barras")
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Part points
-
The MCP2561FDT-E/SN is a CAN (Controller Area Network) transceiver chip manufactured by Microchip Technology. It is designed to facilitate communication between microcontrollers and CAN networks. With robust features and reliability, the MCP2561FDT-E/SN offers improved system performance, making it suitable for applications in automotive and industrial environments.
-
Equivalent
There are no direct equivalent products of the MCP2561FDT-E/SN. However, alternatives you can consider are the MCP2562FD-E/SN and MCP2561-E/SN chips, which are both high-speed CAN transceivers. These alternatives have similar features and can be used as substitutes in certain applications. -
Features
The MCP2561FDT-E/SN is an integrated CAN transceiver with a split termination feature. It operates at improved data rates (up to 1 megabit per second) and provides high electromagnetic compatibility. The device has a wide input voltage range and is compatible with both 5V and 3.3V systems. It is suitable for automotive and industrial applications. -
Pinout
The MCP2561FDT-E/SN is an 8-pin IC specially designed to provide a physical interface between an MCU and a CAN network. It acts as a CAN transceiver and supports the CAN 2.0B protocol. The pin count is 8, and its function is to enable reliable data communication and bus buffering between the MCU and the CAN network. -
Manufacturer
The manufacturer of the MCP2561FDT-E/SN is Microchip Technology Inc. Microchip is a leading American semiconductor company that designs, manufactures, and sells a wide range of integrated circuits and semiconductor products. They specialize in microcontroller and analog semiconductors, providing solutions for various industries including automotive, consumer electronics, industrial, and more. -
Application Field
The MCP2561FDT-E/SN is a high-speed CAN transceiver that is commonly used in automotive and industrial applications. It is specifically designed to provide reliable communication and robustness in harsh environments. Some application areas include automotive control systems, industrial automation, telematics, and communication networks. -
Package
The MCP2561FDT-E/SN chip is available in an SMD package type, with a surface-mount format. It has a small package size, specifically SOIC-8.
Ficha de dados PDF
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
![produtos]( "produtos")
Temos produtos ricos que podem atender às suas diversas necessidades.
-
![quantity]( "quantity")
A quantidade mínima de pedido começa em 1 unidade.
-
![shipping]( "shipping")
A menor taxa de envio internacional começa em US$ 0,00
-
![garantia]( "garantia")
365 dias de garantia de qualidade para todos os produtos
I've saved significant amounts of time and money thanks to Ovaga's services.