Pedidos acima de
$5000MCP2561-E/SN
CAN 1Mbps 5V Automotive AEC-Q100 8-Pin SOIC N Tube
Marcas: Microchip Technology
Parte do fabricante #: MCP2561-E/SN
Ficha de dados: MCP2561-E/SN Ficha de dados (PDF)
Pacote/Caso: 8-SOIC
Status RoHS:
Condição de estoque: 7.303 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
MCP2561-E/SN Descrição geral
Elevating the performance bar, the MCP2561-E/SN features the unique MCP2561FD with a SPLIT pin and MCP2562FD with a VIO pin, catering to diverse design requirements. Whether it's ensuring precise bus length support or delivering robust EMC and ESD protection, this transceiver excels in every aspect. Its versatility makes it ideal for a wide range of automotive applications where CAN FD communication is key
Características
- Supports 1Mbit/s
- Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements
- AEC-Q100 Grade 0
- Very Low Standby Current (5 µA, typical)
- VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
- SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
- An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
- Permanent Dominant Detection on TXD
- Permanent Dominant Detection on Bus
- Power-on Reset and Voltage Brown-Out Protection on VDD Pin
- Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)
- Protection Against High-Voltage Transients in Automotive Environments
- Automatic Thermal Shutdown Protection
- Suitable for 12V and 24V Systems
- High ESD Protection on CANH and CANL, meeting IEC61000-4-2 up to ±14 kV
- Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L
- Extended (E): -40°C to +125°C
- High (H): -40°C to +150°C
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
Package | Tube | Product Status | Active |
Type | Transceiver | Protocol | CANbus |
Number of Drivers/Receivers | 1/1 | Duplex | Half |
Voltage - Supply | 4.5V ~ 5.5V | Operating Temperature | -40°C ~ 125°C |
Mounting Type | Surface Mount | Package / Case | 8-SOIC (0.154", 3.90mm Width) |
Supplier Device Package | 8-SOIC |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
Transferência bancária | cobrar taxa bancária de US$ 30,00. | |
PayPal | cobrar taxa de serviço de 4,0%. | |
Cartão de crédito | cobrar taxa de serviço de 3,5%. | |
Western Union | charge US.00 banking fee. | |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Part points
-
The MCP2561-E/SN is a high-speed CAN transceiver chip that provides a physical interface between a CAN controller and the CAN bus. It is designed for automotive and industrial applications and offers low standby power consumption. This chip features passive behavior during the power-off state, ensuring no disturbance during system shutdown.
-
Equivalent
The equivalent products of the MCP2561-E/SN chip are the TI SN65HVD231, NXP TJA1040, and NXP TJA1042. These chips are all high-speed CAN transceivers that can be used in automotive and industrial applications for communication over a Controller Area Network (CAN) bus. -
Features
The MCP2561-E/SN is a high-speed CAN transceiver that features low standby current consumption, enhanced ESD protection, and a silent mode operation. It is designed for use in automotive and industrial applications and has a temperature range of -40°C to +125°C. -
Pinout
The MCP2561-E/SN is a CAN transceiver with an 8-pin SOIC package. It provides differential transmit and receive capability for the Controller Area Network (CAN) bus protocol. The pins include VCC, GND, TXD, RXD, Vref, S, N, and RS. -
Manufacturer
The manufacturer of MCP2561-E/SN is Microchip Technology Inc., an American company that designs and manufactures microcontrollers, mixed-signal, analog, and flash-IP integrated circuits. It is a leading provider of semiconductor products for various markets including automotive, consumer, industrial, and aerospace applications. -
Application Field
The MCP2561-E/SN is commonly used in automotive applications, including in-vehicle networking such as CAN communication systems. It is also used in industrial automation, consumer electronics, and aerospace applications where reliable and high-speed communication is required. -
Package
The MCP2561-E/SN chip is a surface mount IC package with a SOIC-8 form factor. It measures 4.9mm x 3.9mm x 1.75mm in size.
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos