Pedidos acima de
$5000LM317MDCY
Linear Voltage Regulator IC Positive Adjustable 1 Output 500mA SOT-223-4
Marcas: Texas Instruments
Parte do fabricante #: LM317MDCY
Ficha de dados: LM317MDCY Ficha de dados (PDF)
Pacote/Caso: SOT-223 (DCY)-4
Status RoHS:
Condição de estoque: 2.445 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
LM317MDCY Descrição geral
The LM317M is an adjustable 3-terminal positive voltage regulator capable of supplying more than 500-mA over an output-voltage range of 1.25-V to
37-V. The LM317M is exceptionally easy to use and requires only two external resistors to set the output. Furthermore, both line and load regulation are better than standard fixed regulators.
In addition to having higher performance than fixed regulators, the LM317M includes on-chip current limiting, thermal-overload protection, and safe- operating-area protection. All overload protection remains fully functional if the ADJUST terminal is disconnected.
The LM317 is a floating regulator meaning there is no device ground terminal. Quiescent current flows to the load instead of being wasted flowing to ground. Regulated output voltage of hundreds of volts is possible if the maximum input to output differential does not exceed 40-V at any time. Device can be used as a floating current source controlled by a single resistor.
Normally, no capacitors are needed unless the device is more than six inches from the input filter capacitors, in which case an input bypass capacitor of any type is needed. An optional electrolytic or tantalum output capacitor can be added to improve transient response. Ceramic output capacitors can be used but output ringing may be present on transients. The ADJUST terminal can be bypassed with any type of capacitor to achieve high ripple-rejection ratios, which are difficult to achieve with standard three-terminal regulators.
Características
- Output Voltage Range Adjustable
from 1.25-V to 37-V - Output Current Greater Than 500-mA
- Internal Short-Circuit Current Limiting
- Thermal-Overload Protection
- Output Safe-Area Compensation
- Q Devices Meet Automotive Performance Requirements
- Customer-Specific Configuration Control Can Be Supported for Q Devices Along With
Major-Change Approval
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
Output options | Adjustable Output | Iout (max) (A) | 0.5 |
Vin (max) (V) | 40 | Vin (min) (V) | 3.75 |
Vout (max) (V) | 37 | Vout (min) (V) | 1.2 |
Noise (µVrms) | 38 | Iq (typ) (mA) | 5 |
Thermal resistance θJA (°C/W) | 60 | Rating | Catalog |
Load capacitance (min) (µF) | 0 | Regulated outputs (#) | 1 |
Accuracy (%) | 3 | PSRR at 100 KHz (dB) | 22 |
Dropout voltage (Vdo) (typ) (mV) | 2000 |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
Transferência bancária | cobrar taxa bancária de US$ 30,00. | |
PayPal | cobrar taxa de serviço de 4,0%. | |
Cartão de crédito | cobrar taxa de serviço de 3,5%. | |
Western Union | charge US.00 banking fee. | |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos