Pedidos acima de
$5000AD5200BRMZ10
Digital Potentiometer ICs 8-Bit Digital POT
Marcas: Analog Devices Inc.
Parte do fabricante #: AD5200BRMZ10
Ficha de dados: AD5200BRMZ10 Ficha de dados (PDF)
Pacote/Caso: 10-TFSOP
Status RoHS:
Condição de estoque: 7.463 peças, novo original
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
AD5200BRMZ10 Descrição geral
The AD5200 and AD5201 are programmable resistor devices, with 256 positions and 33 positions respectively, that can be digitally controlled through a 3-wire SPI serial interface. The terms programmable resistor, variable resistor (VR), and RDAC are commonly used interchangeably to refer to digital potentiometers. These devices perform the same electronic adjustment functionas a potentiometer or variable resistor. Both AD5200 / AD5201 contain a single variable resistor in the compact MSOP package. Each device contains a fixed wiper resistance at the wiper contact that taps the programmable resistance at a point determined by a digital code. The code is loaded in the serialinput register. The resistance between the wiper and either end point of the programmable resistor varies linearly with respect to the digital code transferred into the VR latch. Each variable resistor offers a completely programmable value of resistance, between the A terminal and the wiper, or the B terminal and the wiper. The fixed A-to-B terminal resistance of 10 kΩ or 50 kΩ has a nominal temperature coefficient of 500 ppm/°C. The VR has a VR latch that holds its programmed resistance value. The VR latch is updated from an SPI-compatible serial-to-parallel shift register that is loaded from a standard 3-wire serial-input digital interface. Eight data bits for the AD5200 and six databits for the AD5201 make up the data word that is clocked into the serial input register. The internal preset forces the wiper to the midscale position by loading 80H and 10H into AD5200 and AD5201 VR latches respectively. The SHDN pin forces the resistor to an end-to-end open-circuit condition on the A terminal and shorts the wiper to the B terminal, achieving a microwatt power shutdown state. When SHDN is returned to logic high, the previous latch setting puts the wiper in the same resistance setting prior to shutdown. The digital interface is still active during shutdown so that code changes can be made that will produce a new wiper position when the device is returned from shutdown.
Características
- 10K, 50K Ohm End-to-End Terminal Resistance
- 33 Position AD5201 Wiper Connects Directly to Both End Terminals
- 3-Wire SPI Compatible Serial Data Input
- +2.7 V to +5.5 V Single-Supply; ±2.7 V Dual-Supply Operation, Ideal for Ground
- Referenced AC Signals
Aplicativo
- Mechanical Potentiometer Replacement
- Instrumentation: Gain, Offset Adjustment
- Programmable Voltage to Current Conversion
- Programmable Filters, Delays, Time Constants
- Line Impedance Matching
Especificações
Parâmetro | Valor | Parâmetro | Valor |
---|---|---|---|
Package | Tube | Product Status | Active |
Programmabe | Not Verified | Taper | Linear |
Configuration | Potentiometer | Number of Circuits | 1 |
Number of Taps | 256 | Resistance (Ohms) | 10k |
Interface | SPI | Memory Type | Volatile |
Voltage - Supply | 2.7V ~ 5.5V, ±2.3V ~ 2.7V | Tolerance | ±30% |
Temperature Coefficient (Typ) | 500ppm/°C | Mounting Type | Surface Mount |
Supplier Device Package | 10-MSOP | Package / Case | 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) |
Operating Temperature | -40°C ~ 85°C | Resistance - Wiper (Ohms) (Typ) | 50 |
Base Product Number | AD5200 |
Envio
Tipo de envio | Taxa de envio | Tempo de espera | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
FedEx | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 dias | |
CORREIO AÉREO REGISTADO | $20.00-$40.00 (0.50 KG) | 2-5 dias |
Tempo de processamento: A taxa de envio depende de diferentes zonas e países.
Pagamento
Termos de pagamento | Taxa de mão | |
---|---|---|
Transferência bancária | cobrar taxa bancária de US$ 30,00. | |
PayPal | cobrar taxa de serviço de 4,0%. | |
Cartão de crédito | cobrar taxa de serviço de 3,5%. | |
Western Union | charge US.00 banking fee. | |
Grama de dinheiro | cobrar taxa bancária de US$ 0,00. |
Garantias
1.Os componentes eletrônicos que você compra incluem garantia de 365 dias, garantimos a qualidade do produto.
2. se alguns dos itens que você recebeu não forem de qualidade perfeita, providenciaremos seu reembolso ou substituição com responsabilidade. Mas os itens devem permanecer em sua condição original.
Embalagem
-
Etapa1 :produtos
-
Etapa2 :Embalagem a vácuo
-
Etapa3 :Saco antiestático
-
Etapa4 :Embalagem individual
-
Etapa5 :Caixas de embalagem
-
Etapa6 :etiqueta de envio com código de barras
Todos os produtos serão embalados em saco antiestático. Envio com proteção antiestática ESD.
Fora da etiqueta da embalagem ESD serão utilizadas as informações da nossa empresa: Número da peça, marca e quantidade.
Iremos inspecionar todas as mercadorias antes do envio, garantir que todos os produtos estejam em boas condições e garantir que as peças sejam novas folhas de dados originais.
Depois que todas as mercadorias forem garantidas sem problemas na pós-embalagem, embalaremos com segurança e enviaremos por expresso global. Apresenta excelente resistência a perfurações e rasgos, além de boa integridade de vedação.
Part points
-
The AD5200BRMZ10 is a digitally-controlled potentiometer chip that provides 256-position adjustment for precision control in electronic circuits. It operates on a voltage range of 2.7V to 5.5V and offers non-volatile memory, allowing the settings to be retained even when the power is turned off. This chip is commonly used in applications such as audio volume control, LED brightness adjustment, and sensor calibration.
-
Equivalent
Equivalent alternatives to the AD5200BRMZ10 chip include the AD5200BRM10, AD5200BRM50, AD5200BRM100, and AD5200BRZ10. These devices are also digitally controlled potentiometers and offer similar functionality and performance characteristics. -
Features
The AD5200BRMZ10 is a digitally controlled, non-volatile programmable potentiometer with 256 positions and a maximum resistance of 10 kΩ. It operates from a single supply of 2.7 V to 5.5 V and is designed for audio volume control, sensor calibration, and offset adjustment applications. -
Pinout
The AD5200BRMZ10 is a single-channel, non-volatile digital potentiometer with 256 resistor taps. It has a 10 kΩ resistance value and is controlled via a two-wire I2C interface. The device is available in a 10-lead MSOP package and has VREF, SDA, SCL, and GND pins. -
Manufacturer
Analog Devices is the manufacturer of the AD5200BRMZ10. It is a multinational semiconductor company that specializes in designing and manufacturing integrated circuits for various industries including automotive, communication, and industrial applications. Analog Devices is known for its high-performance analog and digital signal processing products. -
Application Field
AD5200BRMZ10 is commonly used in industrial automation, automotive, and communication systems for digital potentiometer applications. It is also suitable for use in audio equipment, medical devices, and test and measurement instruments. Its precision, low power consumption, and small size make it ideal for a wide range of electronic devices. -
Package
The AD5200BRMZ10 chip is a digitally programmable resistor with a 10kΩ resistance value. It comes in a 6-lead SC70 package with a size of 2mm x 2mm.
Oferecemos produtos de alta qualidade, serviço atencioso e garantia pós-venda
-
Temos produtos ricos que podem atender às suas diversas necessidades.
-
A quantidade mínima de pedido começa em 1 unidade.
-
A menor taxa de envio internacional começa em US$ 0,00
-
365 dias de garantia de qualidade para todos os produtos